Descrizione annuncio

DRIVER Celestion - CDX1-1747 60W 8ohm - HF Compression Driver - Ferrite Driver a compressione con magnete in ferrite, uscita da 1", potenza 60Watt, impedenza 8ohm, diaframma in polymide (poliimmide), fissaggio con viti (bolt). Voglia di audio Fai da Te? Per il progetto di un diffusore PA 15" 2-vie, clicca qui Design curato, collaudato e messo a disposizione direttamente da Celestion Caratteristiche - 1" exit, ferrite magnet compression driver with 1.75" edgewound copper clad aluminium voice coil - 60Wrms power handling (AES standard) and 110dB sensitivity - Next generation Sound Castle™ soft clamping assembly reduces diaphragm stress for reduced distortion and even greater reliability of performance - One piece Polyimide diaphragm and surround - Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design Specifiche Generali Power rating(1): 60Wrms Continuous power rating(2): 120W Nominal impedance: 8ohm Frequency range: 1000-20,000Hz Sensitivity(3): 110dB Recommended min. crossover (12dB/oct): 2000Hz 12dB/oct Voice coil diameter: 44mm/1.75in Voice coil material: Edgewound Copper Clad Aluminium Magnet type: Ferrite Diaphragm material: Polyimide Surround material. Polyimide Informazioni di Montaggio Width: 120mm/4.72in Depth: 53mm/2.08in Weight: 2.3kg/5.1lb Fitting: Flange (2/3 M6 holes on 76/57.2, 3.0/2.224in PCD) Throat exit: 25.4mm/1.0in Trombe Compatibili H1-9040P, H1-7050 "No Bell" Note (1)Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. (2)Continuous Power Handling is defined as 3dB greater than the AES rating. (3)Measured on axis at 1W, 1m, using typical horn, in 2 anechoic environment.