Descrizione annuncio

DRIVER Celestion - CDX1-1742 50W 8ohm - HF Compression Driver - Ferrite Driver a compressione con magnete in ferrite, uscita da 1", potenza 50Watt, impedenza 8ohm, diaframma in polymide (poliimmide), fissaggio con viti (bolt). Caratteristiche -2,000Hz recommended min. crossover freq (12dB/oct) -Single piece polyimide diaphragm and surround -Sound Castle soft clamping diaphragm assembly Specifiche Generali Power rating(1): 50Wrms Continuous power rating(2): 100W Nominal impedance: 8ohm Frequency range: 1200-20,000Hz Sensitivity(3): 107dB Recommended min. crossover (12dB/oct): 2,200Hz Voice coil diameter: 44mm/1.75in Voice coil material: Edgewound copper clad aluminium Magnet type: Ferrite Diaphragm material: Polyimide Surround material: Polyimide Informazioni di Montaggio Width: 100mm/4in Depth: 53.5mm/2.1in Weight: 1.43kg/3.1lb Fitting: Flange (2/3 M6 holes on 76/57mm, 3.0/2.24in PCD) Throat exit: 25mm/1in Trombe Compatibili H1-9040P , H1-7050 "No Bell" Note (1)Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. (2)Continuous Power Rating is defined as 3dB greater than the AES rating. (3)Measured on axis at 1W, 1m, using typical horn, in 2pi anechoic environment. Per stampare la scheda prodotto, clicca qui Per una panoramica su tutta la serie Celestion CDX Ferrite, clicca qui Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui