Tramite i social:
Condividi con il tuo cellulare:
Oppure copia e incolla il link della scheda:
CASSA Celestion - TF1230 350W 8ohm - LF Pressed Steel Chassis Loudspeaker - Ferrite Altoparlante da 12" con chassis in acciaio stampato, magnete in ferrite, bobina da 3", potenza 350Watt, impedenza 8ohm Caratteristiche - 12" Bass and mid-range driver providing 94dB sensitivity and 350Wrms (AES standard) power handling - 3" high temperature copper voice coil wound on polyimide for increased reliability - Kevlar-loaded cone with sealed surround and damping for reduced distortion. - Double roll surround for greater excursion control - For use in 2-way or compact 3-way systems Specifiche Generali Nominal diameter: 305mm/12in Power rating(1): 350Wrms Continuous power rating(2): 700W EIA power rating(3): 500W Nominal impedance: 8ohm Sensitivity(4): 94dB Frequency range: 45-3000Hz Voice coil diameter: 75mm/3in Chassis type: Pressed steel Magnet type: Ferrite Magnet weight: 1.4kg/48oz Coil material: Round copper Former material: Polyimide Cone material: Kevlar loaded paper Surround material: Cloth-sealed Suspension: Single Xmax(5): 5mm/0.19in Gap depth: 8mm/0.24in Voice coil winding width: 17.5mm/0.69in Parametri di Thiele-Small D: 0.26m/0.24in Fs: 56.9Hz Mms: 58.59g/2.07oz Qms: 2.411 Qes: 0.615 Mmd: 51.68g/1.82oz Qts: 0.490 Re: 5.18ohm Vas: 53.3lt/1.88ft3 BI: 13.29Tm Cms: 0.133mm/N Rms: 8.69kg/s Le (at 1kHz): 1.20mH Informazioni di Montaggio Overall diameter: 309mm/12.17in Overall depth: 140mm/5.5in Cut-out diameter: 283mm/11.14in Mounting slot dimensions: Ø 7.9/0.31 Number of mounting slots: 4 Mounting PCD range: 297mm/11.69in Unit weight: 4.3kg/9.46lb Note (1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air. (2)Continuous Power Handling is defined as 3dB greater than the AES rating. (3)Tested as per the EIA-426-A standard (4)Measured on axis at 1W, 1m in 2pi anechoic environment. (5)Xmax derived from: (voice coil winding width-gap d
» Apri la scheda completaTramite i social:
Condividi con il tuo cellulare:
Oppure copia e incolla il link della scheda: