Descrizione annuncio

CASSA Celestion - TF0615MR 50W 8ohm - LF Pressed Steel Chassis Loudspeaker - Ferrite Altoparlante da 6" con chassis in acciaio stampato, magnete in ferrite, bobina da 1.5", potenza 50Watt, impedenza 8ohm Caratteristiche - 6" mid-range driver providing 97dB sensitivity and 50Wrms (AES standard) power handling - 1.5" high temperature copper voice coil wound on polyimide former for increased reliability - Very compact model suitable for use in 3-way systems - Optimised to deliver detailed reproduction of mid-range frequencies - Closed back chassis simplifies cabinet manufacture, eliminating need for separate mid-range enclosure Specifiche Generali Nominal diameter: 152mm/6in Power rating(1): 50Wrms Continuous power rating(2): 100W EIA power rating(3): 75W Nominal impedance: 8ohm Sensitivity(4): 97dB Frequency range: 500-5000Hz Voice coil diameter: 38mm/1.5in Chassis type: Pressed steel Magnet type: Ferrite Magnet weight: 0.48kg/17oz Coil material: Round copper Former material: Polyimide Cone material: Kevlar loaded paper Surround material: Treated paper Suspension: Single Parametri di Thiele-Small Fs: 500Hz Re: 5.7ohm Le (at 1kHz): 0.294mH Informazioni di Montaggio Overall diameter: 178mm/7.01in Overall depth: 74mm/2.91in Cut-out diameter: 147mm/5.79in Mounting slot dimensions: Ø 4.3mm/0.17in Number of mounting slots: 4 Mounting PCD range: 168.5mm/6.63in Unit weight: 1.4kg/3.1lb Note (1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air. (2)Continuous Power Handling is defined as 3dB greater than the AES rating. (3)Tested as per the EIA-426-A standard. (4)Measured on axis at 1W, 1m in 2pi anechoic environment. Per stampare la scheda prodotto, clicca qui Per una panoramica su tutta la serie Celestion TF Ferrite, clicca qui Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui