Descrizione annuncio

CASSA Celestion - TF0615 100W 8ohm - LF Pressed Steel Chassis Loudspeaker - Ferrite Altoparlante da 6" con chassis in acciaio stampato, magnete in ferrite, bobina da 1.5", potenza 100Watt, impedenza 8ohm Caratteristiche - 6" mid-range driver providing 95dB sensitivity and 100Wrms (AES standard) power handling - 1.5" high temperature copper voice coil wound on polyimide former for increased reliability - Rigid chassis design for maximum energy transfer - Vented magnet assembly for enhanced cooling - Achieves optimal performance in compact enclosures - Ideal for 2-way systems Specifiche Generali Nominal diameter: 152mm/6in Power rating(1): 100Wrms Continuous power rating(2): 200W EIA power rating(3): 150W Nominal impedance: 8ohm Sensitivity(4): 95dB Frequency range: 85-6000Hz Voice coil diameter: 38mm/1.5in Chassis type: Pressed steel Magnet type: Ferrite Magnet weight: 0.8kg/17oz Coil material: Round copper Former material: Polyimide Cone material: Kevlar loaded paper Surround material: Cloth sealed Suspension: Single Xmax(5): 2.5mm/0.1in Gap depth: 6mm/0.24in Voice coil winding width: 6.5mm/0.26in Parametri di Thiele-Small D: 0.14m/5.51in Fs: 107.2Hz Mms: 11.397g/0.402oz Qms: 5.83 Qes: 0.682 Mmd: 10.316g/0.364oz Qts: 0.611 Re: 7.25ohm Vas: 6.49lt/0.23ft3 BI: 9.03Tm Cms: 0.193mm/N Rms: 1.317kg/s Le (at 1kHz): 0.5mH Informazioni di Montaggio Overall diameter: 178mm/7.01in Overall depth: 74mm/2.91in Cut-out diameter: 147mm/5.79in Mounting slot dimensions: Ø 4.3mm/0.17in Number of mounting slots: 4 Mounting PCD range: 168.5mm/6.63in Unit weight: 1.4kg/3.1lb Note (1)Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air. (2)Continuous Power Handling is defined as 3dB greater than the AES rating. (3)Tested as per the EIA-426-A standard. (4)Measured on axis at 1W, 1m in 2pi anechoic environment. (5)Xmax derived from: (voice coil winding wid