Descrizione annuncio

DRIVER Celestion - CDX1-1447 35W 8ohm - HF Compression Driver - Ferrite Driver a compressione con magnete in ferrite, uscita da 1", potenza 35Watt, impedenza 8ohm, diaframma in polymide (poliimmide), fissaggio con viti (bolt). Caratteristiche - 1" exit, ferrite magnet compression driver with 1.4 inch diameter copper clad aluminium voice coil - 35Wrms (AES standard) power handling and 106dB sensitivity - One piece polyimide diaphragm and surround - Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design - Suitable for 2-way and 3-way systems Specifiche Generali Power rating(1): 35Wrms Continuous power rating(2): 70W Nominal impedance: 8ohm Frequency range: 1500-20,000Hz Sensitivity(3): 106dB Recommended min. crossover (12dB/oct): 2200Hz Voice coil diameter: 35mm/1.4in Voice coil material: Copper clad aluminium Magnet type: Ferrite Diaphragm material: Polyimide Surround material: Polyimide Informazioni di Montaggio Width: 90mm/3.54in Depth: 46.5mm/1.83in Weight: 1kg/2.2lb Fitting: Flange (4 x M6 holes on 76mm/3in PCD) Throat exit: 25mm/1in Trombe Compatibili H1-9040P , H1-7050 "No Bell" Note (1)Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. (2)Continuous Power Handling is defined as 3dB greater than the AES rating. (3)Measured on axis at 1W, 1m, using typical horn, in 2pi anechoic environment. Per stampare la scheda prodotto, clicca qui Per una panoramica su tutta la serie Celestion CDX Ferrite, clicca qui Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui