Progettato per l’uso con tom, rullanti e strumenti a percussione, il Beta98 è un microfono a condensatore in miniatura ad elevate prestazioni perfetto sia per il rinforzo sonoro che per la registrazione. Con i supporti opzionali A98KCS e A98D, dotati di collo d’oca flessibile, è possibile posizionare il microfono facilmente ed in modo sicuro. Ampia gamma dinamica per l’utilizzo con SPL elevate (sino a 161dB) Dimensioni ridotte Modello di ripresa supercardioide Risposta in frequenza: 20 – 20.000 HzType Condenser (electret bias) Frequency Response 20 to 20,000 Hz    view larger (measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions) Polar Pattern Supercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available. Output Level (at 1,000 Hz) Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical *1 Pa = 94 dB SPL Maximum SPL (20 Hz to 20 kHz, less than 1% THD) 2.5 kilohm load: 160 dB 1 kilohm load: 156 dB Preamplifier Output Clipping Level (20 Hz to 20 kHz, less than 1% THD) 2.5 kilohm load: + 6 dBV (2.0 V) 1 kilohm load: + 2 dBV (1.26 V) Dynamic Range (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load) 125 dB (max SPL minus A-weighted noise) Output Noise 35 dB SPL, A-weighted Signal-to-Noise Ratio 59 dB re 94 dB SPL Output Impedance Rated at 150 ohms (actual) Recommended minimum load impedance: 1 kilohm Hum Pickup -7.5 dB equivalent SPL in 1 mOe field (60Hz) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Phantom Power 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3. Cable BETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors. BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors. Case Microphone: Matte black enamel brass case and stainless steel inner grille Preamplifier: Matte black enamel