Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT8015 provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.
- Designed for video production and broadcast (ENG/EFP) audio acquisition.
- Provides the narrow acceptance angle desirable for long-distance sound pickup.
- Excellent sound rejection from the sides and rear of mic.
- Switchable low-frequency roll-off.
- Operates on battery or phantom power.
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances.
SPECIFICATIONS:
- ELEMENT: Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN: Line + gradient
- FREQUENCY RESPONSE: 40-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY:
Phantom: –38 dB (12.5 mV) re 1V at 1 Pa.
Battery: –39 dB (11.2 mV) re 1V at 1 Pa.
- IMPEDANCE:
Phantom: 250 ohms
Battery: 300 ohms
- MAXIMUM INPUT SOUND LEVEL:
Phantom: 132 dB SPL, 1 kHz at 1% T.H.D.
Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical)
Phantom: 110 dB, 1 kHz at Max SPL
Battery: 98 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 72 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
- BATTERY TYPE: 1.5V AA/UM3
- BATTERY CURRENT/LIFE: 0.4 mA/1200 hours typical
(alkaline)
- SWITCH: Flat, roll-off
- WEIGHT: 195 g (6.9 oz)
- DIMENSIONS: 460.0 mm (18.11") long,
21.0 mm (0.83") diameter
- OUTPUT CONNECTOR: Integral 3-pin XLRM-type
Informazioni tecniche dettagliate sul sito del produttore: <a href="http://www.audio-technica.com/cms/wired_mics/8ed1
Per rispondere agli annunci devi essere registrato ed aver effettuato il login.

