escrizione:
DIFFUSORI ACUSTICI AMPLIFICATI 175W CADAUNO
Application:
Live sound reinforcement, speech, vocals, and
music playback in entertainment, A/V, and
institutional venues – especially when ease of
use, audio quality and portability are important
factors.
Amplification, mixing, and monitoring for
electronic and electro-acoustic instruments.
Key Features:

The second generation of one of the most
successful and influential professional speaker
systems ever.

10½ Differential Drive® low frequency driver
with neodymium magnet for light weight and
reduced distortion.

1½ JBL compression driver with titanium
diaphragm and ferro-fluid cooling.

125 watt low-frequency and 50 watt highfrequency
(bi-amplified) amplifiers – Actual
power delivered to the drivers.

Three inputs. One balanced, mic/line selectable
input and one dual-channel, 1/4½ TRS
phone line-level input.

Balanced loop/mix output. “Daisy-chain”
additional EON speakers or send the mixed
output to a mixing console.

60° x 90° (nominal) constant directivity horn.

Thermomaster® Total Thermal Management
System®. A single piece, cast-aluminum baffle
integrates the woofer frame, horn, and
amplifier heat sink. Air movement in the
finned ports dissipates heat – no internal or
external cooling fans are required.

Rugged, lightweight, black co-polymer
enclosure.

Integral 35 mm pole mount receptacle with
securing thumb screw.

Multi-angle enclosure for front of house or
stage monitor application.

For more low-frequency power and
performance, add the EONSUB G2.
Specifications
Freq. Range (-10 dB): 65 Hz - 18 kHz
Freq. Response (±3 dB): 90 Hz - 16 kHz
Horz. Coverage (-6 dB): 90° Nominal
Vert. Coverage (-6 dB): 60° Nominal
Rated Maximum SPL: 117 dB, @ 1 m (3.3 ft)
Dimensions (H x W x D): 493 mm x 356 mm x 307 mm
(19.4 in x 14.0 in x 12.1 in.)
Net Weight: 10.4 kg (23 lb)
LF Driver: Integral frame with one 10½ (254 mm) driver,
neodymium magnet, 1.5½ Differential Drive voice
coil.
HF Driver: JBL 2412 1½ compression driver, titanium
diaphragm, ferro-fluid cooled.
Amplifier Power LF: 125 watts @ low-frequency driver impedance.
Amplifier Power HF: 50 watts @ high-frequency driver impedance.
Input 1 Sensitivity: -48 dBu to 0 dBu for rated output
(Mic/Line switch in MIC position)
-6 dBu to +20 dBu for rated output
(Mic/Line switch in LINE position)
Input 2 & 3 Sensitivity: -12 dBu to +20 dBu for rated output
Output Level: +26 dBu (max), Loop/Mix switch in MIX position
Crossover Frequency: 2.7 kHz
Loop/Mix Out: XLR/M, balanced
AC Input: 110-230 VAC, 50-60 Hz, 110 watts rating per UL,

VISITA IL NOSTRO SITO WWW.GALLERIADELLAMUSICA.COM
MODALITA' DI PAGAMENTO:
- POSTEPAY
- BONIFICO BANCARIO
- CONTRASSEGNO
- PAGAMENTI RATEALI BIPIELLE DUCATO